|
christopher2021
Angemeldet seit:
01.07.2021
Beiträge: 5802
|
We have completed 1 order for a ***** from *****. This is a HD type *****, the main beam adopts Welded box-section beam, mainly use material Q235B carbon structural steel strong and elegant, easy to maintain. Three-layer painting.
Single Girder Overhead Crane parameters
Lifting capacity=3T
Lifting height=9.144m (30ft)
Span=12.192m (40ft)
480V 60Hz 3P
FEM 2M (ISO M5)
Pendant and remote control
Note:
Our offer includes supply of complete crane.
Installation, commissioning & site testing:not included.
Crane rail and bus bar system are not included. Quotation can be provided upon client’s request.
Technical information
Lifting capacity t 3
Lifting height m 9.144
Span m 12.192
Speed Cross traveling speed m/min 2-20 (inverter control)
Crane traveling speed 2-20 (inverter control)
Lifting speed 0.8-5.0 (inverter control)
Working class / FEM2M (ISO M5)
Power supply V/Hz/Ph 480/60/3
Cross traveling power KW 0.37
Crane traveling power 2*0.37
Hoisting power 3.0
Total power 4.11
Max wheel load KN 23.5
Total weight Kg 2350
Protection class / IP54
Insulation grade / F
Ambient temperature / -20℃~+40℃
Anti-collision system / Included
Phase protection relays / Included
Limit switch / Included
Voltage Low Protect device / Included
Emergency stop action / Included
Ground fault protection / Included
Short-circuit protection / Included
Over-heating protection / Included
Power-off protection / Included
Over-current protection / Included
Overload protector / Included
Top Quality Buffer / Included
Cross Power / Festoon Cables
Country of Origin China
Recommended Crane Rail Specification (not included in the offer)
Type Top Width(mm) Bottom Width(mm) Height(mm) Weight(kg/m)
P18 40 80 90 18.06
Overhead Crane Finished Installation
3t European-spec Single Girder Overhead Crane
3 ton European-spec Single Girder Overhead Crane SZW motor
(The above picture is for reference to crane model only)
QD type hook bridge crane is a general-purpose bridge crane for trolleys. The crane relies on the longitudinal movement along the direction of the supporting track on the driving beam of the workshop, the lateral movement of the trolley and the lifting of the hook to realize the working process. The common lifting capacity is 5 tons-600t , working level A3A4A5-A8. There are three types of bridge crane operation modes: ground control, control room control and remote control for users to choose.
A5 level is suitable for general machining and assembly workshops, metal structure workshops, mechanical maintenance workshops, etc., where the workload is not very heavy;
A6 and A7 grades are suitable for occasions with frequent work or continuous production or continuous handling, and can also be used as shop-lifting and hoisting in metallurgical and foundry workshops; the operating environment temperature is -20-40 ℃, and the relative humidity is ≤85%;
*****
|
