|
christopher2021
Angemeldet seit:
01.07.2021
Beiträge: 5802
|
We completed the installation of 1 ***** in the *****. This is a LD type 7-ton single-girder bridge crane. In terms of structure, we use Main material Q235B carbon structural steel for the main beam, strong and elegant, easy to maintain, three-layer painting. Q235B carbon square steel structure was used for the end beams, providing horizontally travelling for the crane with three-in-one motors and buffers.
Single girder overhead crane parameters
Lifting Capacity=7T A4
Lifting height=9m
Span=15m
220V 60Hz 3P
Pendant control or remote control
Note:
Our offer includes supply of complete crane.
Installation, commissioning & site testing:not included.
As span is 15meters, in order to fit in container, the main girder will be disconnected and reconnected using high-strength bolts provided by our factory. Reference picture below:
Schematic diagram of truncation of main beam of bridge crane
Technical information
Rated capacity t 7
Testing capacity 8.75
Lifting height m 9
Span m 15
Speed Trolley travelling speed m/min 20
Crane travelling speed 20
Lifting speed 7
Working class / A4
Power supply V/Hz/Phase 220/60/3
Trolley travelling power KW 0.8
Crane travelling power 2*1.5
Hoist power 7.5
Total power 11.3
Total weight t 6.894
Max wheel load KN 42.2
Total wheels / 4
Insulation class / F
Working ambient temperature / -20℃~+40℃
Country of origin / China
Recommended Crane Rail Specification (not included in this offer)
Type Top Width(mm) Bottom Width(mm) Height(mm) Weight(kg/m)
P24 51 92 107 24.46
Pictures of this Single girder overhead crane for reference
Overhead Crane Finished Installation-electrical box and wire rope hoistOverhead Crane Finished InstallationOverhead Crane Finished Installation
(The above picture is for reference to crane model only)
The main girder of LD type electric single-girder overhead crane adopts box-shaped main girder, off-track form, and a special trolley is used together with CDⅠ, MDⅠ and other electric hoists. The applicable lifting weight is 1-10t, the applicable span is 10.5-25.5 meters, and the working environment temperature is in the range of -25-+40℃. Single-girder overhead cranes are widely used in workshops, warehouses, stockyards, etc. in machinery manufacturing workshops, metallurgical workshops, ports, railways, logistics, assembly, papermaking, building materials, electronics and other industries. It is widely used in factories, warehouses, stockyards and other occasions to lift goods. It is forbidden to use in flammable, explosive and corrosive medium environments.
*****
|
