|
christopher2021
Angemeldet seit:
01.07.2021
Beiträge: 5802
|
As a mechanical product with certain dangers, overhead cranes must be required to pass corresponding training before the crane operator officially takes up the job. As a Chinese crane supplier, Dongqi Crane provides various types of crane products to customers around the world. We can also provide the necessary training content if the customer has demand. This article will briefly introduce the knowledge points generally involved in the training of ***** and rigging.
OVERHEAD CRANE OPERATOR, BASIC RIGGING TRAINING
What to do with overhead crane and rigging training
Comprehend Overhead Crane & Rigging Fundamentals and Regulations
Understand Safe Operating Procedures to Eliminate Potential Hazards
Identify Crane and Rigging Components and their Functions
Understand Equipment Specifications, Limitations, Inspection and Care
Understand Methods for Proper Planning of a Lift
Understand Sling Angles and How they Affect the Rated Capacity
General Safe Use of Rigging and Hardware Components
Topics covered in overhead crane and rigging training
General Precautions
*****
WorkSafeBC Rules & Regulations
Daily Crane Inspections
Safety of Workers
Safe Operations & Lifting
Hand Signals
Lift Types
Spreader Bars and Lifting Devices
Safe Work Practices and Procedures Specific to your Work Place
Basic Rigging Hardware & Components
Rigging Precautions
OVERHEAD CRANE OPERATOR, BASIC RIGGING TRAINING
Overhead Crane and Rigging Training Needs to Know
Rules, Regulations and Standards Governing The Safe Operations of Overhead Cranes
Different Types of Overhead Cranes
Crane Components and their Functions
How to Complete and Document Pre-Shift Inspections
Proper Lifting, Traveling and Lowering Techniques
Operational Hazards
ANSI Certified Hand Signals
Lift Types; Repetitive and Critical Lift Criteria
Under Hook Lifting Devices
Safe Use of Magnets
Overall Care and Maintenance of Cranes
Slings and their Capacities
Different Hitch Types
Applications of Hardware
Acceptance and Rejection Criteria
Load Control – Center of Gravity & Stability
OVERHEAD CRANE OPERATOR, BASIC RIGGING TRAINING
Lifting workers safety technical disclosure content
Crane workers must undergo professional training, pass the examination, and obtain the “Lifting Operation Certificate” before they can engage in lifting operations.
Before working, you should understand the task clearly and determine a reliable working method. When all the participating workers have no doubts about the tasks and methods, they can start work.
Bind objects with sharp edges and use soft pads to avoid cutting the rope.
When working near high-voltage lines or live objects, keep a certain safety distance from the live objects according to regulations.
During the lifting operation, it is strictly forbidden for anyone to stay or work under the lifting piece. It is strictly forbidden for personnel to lift and lower on the hook of the crane.
When commanding mechanical lifting equipment and workpieces, the safety and technical requirements of the crane driver shall be respected, and no decision shall be made alone without the consent of the crane driver.
When instructing the lifting machinery to work, the hook should be on the center of gravity of the heavy object, and it is strictly forbidden to drag the heavy object in the inclined state.
When the lifted heavy object is moved horizontally, the heavy object should be 0.5 meters higher than the highest obstacle.
Lifting large or irregular heavy objects should be tied to a traction rope to prevent the parts from shaking and rotating.
For immeasurable heavy objects buried in the ground, mechanical lifting is prohibited.
Without approval, it is not allowed to modify or replace the various parts of the generator.
When the lifting heavy object is 10 cm above the ground, stop the machine to check the rope buckle, spreader and crane
*****
|
